Fire Monitor 45mm 1:50 Scale (Pack of 1) This working model of a water cannon can be connected to a water pump for realistic action. The kit consists of injection-moulded parts, a brass tube and silicone tube. The water cannon can be rotated by means of a servo and two different nozzles are included which produce different kinds of water jets. The connector tube has a diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm. The water cannon can be painted as required.
Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.
John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.
Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.
The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity
A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.
Key Features 16 watt energy saving fluorescent tube (LC8076/T) Cable length 1.5m Electronic ballast - more energy efficient Includes table clamp with cone holder foir extra stability Long Reach Slim Line Magnifier Lamp Quality 125mm (5") lens, 3 dioptre (1.75x mag.) Removable sun protector cap Shadow free light with low heat emission
The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.
Card modelling is the construction of models from sheets of card on which the component parts are printed. The individual components require cutting out with a sharp knife or scissors, which are then scored and folded into shape. The skill of the designer enable quite complex and details models to be built without the time or expense of more traditional constructional methods.
Only the simplest of tools are required such as a sharp knife, scissors; a blunt pointed instrument used for scoring , such as a knitting needle or screwdriver; a ruler; a smooth cutting surface such as a rubberised cutting mat, and a suitable adhesive such as a white PVA or Aliphatic resin.
