Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Planet 2+2 4 Channel Transmitter and Receiver Set

Planet 2+2 4 Channel Transmitter  and Receiver Set

Planet 2+2 4 Channel Transmitter and Receiver Set

Single-axis throttle (up/down) and steering (left/right) sticks
Proportional steering and throttle control with adjustable dual rates
Digital trims on steering and throttle channels
Servo reversing on steering and throttle controls
Auxiliary channel with rotary dial (CH4)
Auxiliary channel with 3-position switch (CH3 )
2.4GHz AFHSS Proteus radio protocol
Tx charge port for rechargeable batteries (not included)

What's in the Box
1x Planet 2+2 transmitter
1x Planet Proteus 6-channel receiver
1x User manual

find out more

39.98 / US$41.98

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies, designed to be used with Revell kits) During the war, German submarines often stayed at sea for very long time and supplies of food and ammunition had to be taken aboard in large quantity, either when the submarine was in the port or even at sea from other supply ships or even supply submarines.Now, we are bringing these food and ammo crates in the form of a nicely detailed resin set, which can be used with other models too.

find out more

6.98 / US$7.33

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Yet another of the world’s best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, large parts are cast from resin and tiny parts which could not be produced by the means of resin casting are injection moulded into metal type moulds.

find out more

27.20 / US$28.56

Radiolink 8 channel Transmitter and two Receiver Set

Radiolink  8 channel Transmitter and two Receiver Set

Radiolink 8 channel Transmitter and two Receiver Set

Equipped with FHSS frequency-hopping spread spectrum protocol that offers a superior transmission rate, enhanced interference rejection and a secure full range capability. Perfect for all R/C disciplines from aircraft to quadcopters, through boats, cars and even trucks and locomotives, this is one transmitter that won’t be collecting dust. Take a look at the full feature-set and make special note of its low power consumption, ease of use, and, crucially, the fact that it’s supplied with two R8EF 8-channel receivers.

What's in the Box
1 x T8FB 2.4GHz 8-channel transmitter.
2 x R8EF 8-channel receivers.
1 x Throttle stick spring retainer.
1 x USB (standard) to USB (micro) lead.

Needed to Complete
4 x AA-size batteries for transmitter.

find out more

59.95 / US$62.95

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

find out more

5.68 / US$5.96

Universal Motor mounting bracket

Universal Motor mounting bracket

Universal bracket with various mounting hole spacings. Fits all 540,545, & 600 sized motors motors without modification, and will accept 700 sized motors with a bit of filing

find out more

11.74 / US$12.32

Searchlight 6v 20mm dia plastic

Searchlight 6v 20mm dia plastic

2-directional working model, 6V /100mA, pack of 1,
Diameter: 20 mm Height: 34 mm

find out more

8.71 / US$9.15

Working Searchlight plastic 15mm dia 6v

Working Searchlight plastic 15mm dia 6v

Rotating and tilting searchlight with glazed lens, powerful 6V/100mA bulb, Diameter: 15 mm, Height: 24 mm, Cable length: approx.´100 mm

find out more

6.74 / US$7.08

spacer

Ladders

Online Catalogue | Ship Fittings | Billing Fittings |  Ladders

Ladder angled step.12x55mm Ladder angled step.12x55mm
Ref: F181
Ladder angled step. Plastic 12x55mm

Price: 2.10 / US$2.21 (US$ Tax Free Price)


Quantity:  


18x45mm rung ladder 18x45mm rung ladder
Ref: F744
18x45mm vertical rung ladder

Price: 2.10 / US$2.21 (US$ Tax Free Price)


Quantity:  


Ladder 11x45mm Ladder 11x45mm
Ref: F714
Ladder 11x45mm

Price: 1.15 / US$1.21 (US$ Tax Free Price)


Quantity:  


Ladder vertical rung 5mm wide Ladder vertical rung 5mm wide
Ref: F598
Ladder vertical rung 5mm wide x 80mm long

Price: 1.68 / US$1.76 (US$ Tax Free Price)


Quantity:  


Ladder 5x50mm Ladder 5x50mm
Ref: F483
Ladder 5x50mm

Price: 0.83 / US$0.87 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Fittings | Billing Fittings |  Ladders

spacer
spacer