Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.27

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$238.87

Planet 2+2 4 Channel Transmitter and Receiver Set

Planet 2+2 4 Channel Transmitter  and Receiver Set

Planet 2+2 4 Channel Transmitter and Receiver Set

Single-axis throttle (up/down) and steering (left/right) sticks
Proportional steering and throttle control with adjustable dual rates
Digital trims on steering and throttle channels
Servo reversing on steering and throttle controls
Auxiliary channel with rotary dial (CH4)
Auxiliary channel with 3-position switch (CH3 )
2.4GHz AFHSS Proteus radio protocol
Tx charge port for rechargeable batteries (not included)

What's in the Box
1x Planet 2+2 transmitter
1x Planet Proteus 6-channel receiver
1x User manual

find out more

39.98 / US$42.65

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies, designed to be used with Revell kits) During the war, German submarines often stayed at sea for very long time and supplies of food and ammunition had to be taken aboard in large quantity, either when the submarine was in the port or even at sea from other supply ships or even supply submarines.Now, we are bringing these food and ammo crates in the form of a nicely detailed resin set, which can be used with other models too.

find out more

6.98 / US$7.45

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Yet another of the world’s best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, large parts are cast from resin and tiny parts which could not be produced by the means of resin casting are injection moulded into metal type moulds.

find out more

27.20 / US$29.02

Radiolink 8 channel Transmitter and two Receiver Set

Radiolink  8 channel Transmitter and two Receiver Set

Radiolink 8 channel Transmitter and two Receiver Set

Equipped with FHSS frequency-hopping spread spectrum protocol that offers a superior transmission rate, enhanced interference rejection and a secure full range capability. Perfect for all R/C disciplines from aircraft to quadcopters, through boats, cars and even trucks and locomotives, this is one transmitter that won’t be collecting dust. Take a look at the full feature-set and make special note of its low power consumption, ease of use, and, crucially, the fact that it’s supplied with two R8EF 8-channel receivers.

What's in the Box
1 x T8FB 2.4GHz 8-channel transmitter.
2 x R8EF 8-channel receivers.
1 x Throttle stick spring retainer.
1 x USB (standard) to USB (micro) lead.

Needed to Complete
4 x AA-size batteries for transmitter.

find out more

59.95 / US$63.95

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

find out more

5.68 / US$6.05

Universal Motor mounting bracket

Universal Motor mounting bracket

Universal bracket with various mounting hole spacings. Fits all 540,545, & 600 sized motors motors without modification, and will accept 700 sized motors with a bit of filing

find out more

11.74 / US$12.52

spacer

Brown, Son & Ferguson

Online Catalogue | Books |  Brown, Son & Ferguson

From Comet to Caledonia by Donald Watson: From Comet to Caledonia by Donald Watson:
Ref: K713
From Comet to Caledonia by Donald Watson: There have been several hundred Clyde built paddle steamers, which have plied the Estuary and the west coast of Scotland since the introduction of the first paddle steamer, Henry Bell's Comet of 1812. The many papers, publications, advertisements, travellers tales, and pictures, etc., which have appeared since that time, have left us with an assortment of information, sometimes conflicting, about many of these ships. Gleaning information from some of the above sources, this book tries to establish what several of the Clyde paddle steamers actually looked like as originally built, what changes were made to them during their lives, and what they looked like in their final condition. Each steamer is illustrated by a three-view drawing carrying notes about the alterations made during the steamers life, there is a short text with brief details about the ship, and photographs or a sketch of each ship is also included.



Quantity:  


Merchant Ship Construction by H.J. Pursey Merchant Ship Construction by H.J. Pursey
Ref: K647
Merchant Ship Construction by H.J. Pursey: Primarily written for those taking their Department of Trade Certificate exams, this book describes General construction techniques of merchant vessels from the early 1940's to the present. The book is divided into five sections covering the various component parts of the ship and how they are assembled; a special section on the Oil Tanker; Shipyard practice; Surveys, Steel, Tonnage, Freeboard and Loadlines and a section on Stresses and Stress diagrams. The latter sections are somewhat technical and of little direct use to the modeller, but nonetheless ,make for an interesting winter evenings reading.

Price: 28.00 / US$35.84 /US$46.20 (Tax Free)


Quantity:  


West Highland Steamers by G. E. Langmuir: West Highland Steamers by G. E. Langmuir:
Ref: K646
West Highland Steamers by G. E. Langmuir: Those of all ages who can recall happy holidays spent in the Western Highlands and Islands of Scotland, will find much of interest in this book. Covering the period from 1851 to 1987, the author records every steamer in the Hutcheson/MacBrayne fleet and those of other owners who have operated in the area from time to time. Fleet lists, in tabular form, give the principle particulars of most of the vessels described.

Price: 25.00 / US$32.00 /US$41.25 (Tax Free)


Quantity:  


Plank on Frame Models. Volume Two by Harold A Underhill Plank on Frame Models. Volume Two by Harold A Underhill
Ref: 720136
Plank on Frame Models Volume Two: Over the years these two volumes have become to be regarded as the authoritative works on the subject of modelling ship construction and rigging. Volume one describes the building of the Brigantine 'Leon', starting from frame construction through to the completion of the various deck fittings. Volume two is primarily concerned with the rigging of the model built on volume one.

Price: 20.00 / US$25.60 /US$33.00 (Tax Free)


Quantity:  


Plank on Frame Models. Volume One by Harold A Underhill Plank on Frame Models. Volume One by Harold A Underhill
Ref: 720135
Plank on Frame Models. Volume One: Over the years these two volumes have become to be regarded as the authoritative works on the subject of modelling ship construction and rigging. Volume one describes the building of the Brigantine 'Leon', starting from frame construction through to the completion of the various deck fittings. Volume two is primarily concerned with the rigging of the model built on volume one.

Price: 25.00 / US$32.00 /US$41.25 (Tax Free)


Quantity:  


Puffer Ahoy by G.W. Burrows Puffer Ahoy by G.W. Burrows
Ref: 720134
Puffer Ahoy by G.W. Burrows A book about the puffers on the West Coast of Scotland. The first part of the book consists of short stories about various puffers and the journeys which they made, The second part, a unique collection of old photographs and paintings, some in colour, showing these puffers. Finally, there is a small section of old photographs showing other older forms of transport in the early 1900's

Price: 20.00 / US$25.60 /US$33.00 (Tax Free)


Quantity:  


Masting & Rigging of Clipper Ship and Ocean Carrier Masting & Rigging of Clipper Ship and Ocean Carrier
Ref: 610278
Masting & Rigging of Clipper Ship and Ocean Carrier by Harold A Underhill: This book containing 50 full page working drawings and 200 detail sketches, fully covers the whole subject of spar construction and rig of nineteenth and twentieth century merchant square riggers and is the definitive work on the subject. All you modellers of Cutty Sark's etc, will find this book invaluable.



Quantity:  


Online Catalogue | Books |  Brown, Son & Ferguson

spacer
spacer