Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Eyebolt M1 Ball Ø:2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 Ball :2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 BallØ:2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm. Pack of 4.

find out more

1.08 / US$1.15

Ships Horn Ø5mm L:15mm

Ships Horn 5mm L:15mm

Ships Horn Ø:5mm L:15mm: Bell tapers from Ø5 to 1.5mm along 11mm length. Diaphragm chamber Ø3.7mm length 4mm. Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø1mm, Fixing Pin Length 2.5mm. Pack of 2.

find out more

3.60 / US$3.84

Fire Monitor 45mm 1:50 Scale (Pack of 1)

Fire Monitor 45mm 1:50 Scale  (Pack of 1)

Fire Monitor 45mm 1:50 Scale (Pack of 1)
This working model of a water cannon can be
connected to a water pump for realistic action. The kit
consists of injection-moulded parts, a brass tube and silicone
tube. The water cannon can be rotated by means of a servo
and two different nozzles are included which produce
different kinds of water jets. The connector tube has a
diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm.
The water cannon can be painted as required.

find out more

20.10 / US$21.44

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.

John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.

Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.

find out more

9.95 / US$12.74

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

Contains Ten WW2 crew members, of which two are officers. Arms and legs are separate from the body mouldings allowing various poses ro be made.

find out more

17.99 / US$19.19

Mtroniks High PowerMicro Switcher

Mtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

find out more

39.98 / US$42.65

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.27

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$238.87

spacer

Cabin Cruisers & Launches

Online Catalogue | Radio Control Kits |  Cabin Cruisers & Launches

Sea Queen Cabin Cruiser 1170mm Sea Queen Cabin Cruiser 1170mm
Ref: CC2000
Sea Queen Cabin Cruiser 1170mm

Completely re-engineered from the original Aerokits templates, these kits have been brought into the 21st century using modern CNC cutting techniques. The kits include all hardware such as propshaft, prop, motor and coupling. The fittings are mostly made from cast white metal and just ooze that 1960's and 70's feel when these kits were in production. Relive your chldhood again.

All required timber; CNC manufactured pre-cut and pre-profiled components; All windows glazed and framed; 6 glazed and framed portholes; Integral engine mount; Integral R/C platform; 17” stainless steel propshaft (M4); Coupling unit; Hull matched 12V low drain, high torque, electric motor (suitable for up to 24V); Hull matched 75mm, 3 bladed, cast solid brass prop (M4); Large brass rudder; Searchlight; 6 fairleads; Ships wheel; 2 cleats; 1 red side light; 1 green side light; 1 two tone horn; 2 jackstaffs; Anchor; Comprehensive instruction manual and scale plan sheets.

Price: 213.74 / US$227.99 (US$ Tax Free Price)


Quantity:  


Sea Commander Cabin Cruiser 863mm Sea Commander Cabin Cruiser 863mm
Ref: CC2001
Sea Commander Cabin Cruiser with Fittings 863mm

Completely re-engineered from the original Aerokits templates, these kits have been brought into the 21st century using modern CNC cutting techniques. The kits include all hardware such as propshaft, prop, motor and coupling. The fittings are mostly made from cast white metal and just ooze that 1960's and 70's feel when these kits were in production. Relive your chldhood again.


Complete with all required timber, CNC manufactured pre-cut & pre-profilled components, all windows glazed and framed, integral engine mount, integral RC platform, 12" inch M4 stainless stell propshaft, coupling unit, hull matched 12V 750 Speed electric motor, hull matched 40mm 2 bladed prop, brass rudder, comprehensive instruction manual and scale plan sheets.
Comes complete with fittings set

Price: 190.78 / US$203.49 (US$ Tax Free Price)


Quantity:  


Lisa M. Flybridge Motorcruiser 1:25 scale 690mm Lisa M. Flybridge Motorcruiser 1:25 scale 690mm
Ref: K20320
Krick: Lisa M. Flybridge Motorcruiser 1:25 scale 690mm

The Lisa M. is a typical motor yacht similar to the ones you would find in most ports and Marinas worldwide. It has a classical and elegant design with good performance. All parts of the structure are laser cut from plywood . The hull is formed from ABS and secures thus absolutely simple installation of the drive unit with optimum watertightness and security when driving. The deck is one piece ply and contains a large opening for ease of access. The complete structure can be removed in one piece. All included fittings are either plastic or metal. The ship's boat is available as optional extra. In addition, without ship's boat at the tail this model works top. A detailed manual with step by step illustrations as well as plans at 1:1 scale are included.

Price: 120.47 / US$128.50 (US$ Tax Free Price)


Quantity:  




Related products:
1. 7.2v style power connectors (Ref: P08795)
Nordstrand. Diesel Trawler Yacht 850mm Nordstrand. Diesel Trawler Yacht 850mm
Ref: K21430
Krick: Nordstrand. Diesel Trawler Yacht 850mm

Nordstrand is a freelance model of a fishing yacht.

With a vacuum formed ABS hull and superstructure, die-cut timber and plastic parts and fittings as shown in the photograph. Two full size plan sheets and a detailed instruction manual. This model is an excellent on the water performer and ideal as a regatta model.

Price: 181.28 / US$193.37 (US$ Tax Free Price)


Quantity:  


Lady Beale Lady Beale
Ref: DM101
Lady Beale Slipper Launch 1:10 scale 720mm

Price: 119.93 / US$127.92 (US$ Tax Free Price)


KIT CLEARANCE
Buy this item now, and get 20% off the price shown

Quantity:  


Lady Of Wroxham Lady Of Wroxham
Ref: DM100
Lady Of Wroxham Ex Navy Service launch 1:15 scale 720mm

Price: 119.93 / US$127.92 (US$ Tax Free Price)


Quantity:  


T.S.D.Y Dufresne T.S.D.Y Dufresne
Ref: DM44
T.S.D.Y Dufresne 1966 825mm

Price: 215.95 / US$230.35 (US$ Tax Free Price)


Quantity:  




Related products:
1. Std Radio Control Package (Ref: RCPD4)
2. Motor & Cable Package (Ref: RCPD12)
3. 2.7ah Battery & Charger Package (Ref: RCPD15)
4. Coupling Package (Ref: RCPD3)
Melita Melita
Ref: DM49
Melita. Twin-screw diesel yacht. 1964 1:24 736mm

Price: 209.21 / US$223.16 (US$ Tax Free Price)


Quantity:  




Related products:
1. Std Radio Control Package (Ref: RCPD4)
2. Twin Motor & Cable Package (Ref: RCPD10)
3. 2.7ah Battery & Charger Package (Ref: RCPD15)
4. Coupling Package (Ref: RCPD3)

Online Catalogue | Radio Control Kits |  Cabin Cruisers & Launches

spacer
spacer