Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Planet 2+2 4 Channel Transmitter and Receiver Set

Planet 2+2 4 Channel Transmitter  and Receiver Set

Planet 2+2 4 Channel Transmitter and Receiver Set

Single-axis throttle (up/down) and steering (left/right) sticks
Proportional steering and throttle control with adjustable dual rates
Digital trims on steering and throttle channels
Servo reversing on steering and throttle controls
Auxiliary channel with rotary dial (CH4)
Auxiliary channel with 3-position switch (CH3 )
2.4GHz AFHSS Proteus radio protocol
Tx charge port for rechargeable batteries (not included)

What's in the Box
1x Planet 2+2 transmitter
1x Planet Proteus 6-channel receiver
1x User manual

find out more

39.98 / US$42.32

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies (38 various parts)

Type VIII/IXC Ammo and Food Supplies, designed to be used with Revell kits) During the war, German submarines often stayed at sea for very long time and supplies of food and ammunition had to be taken aboard in large quantity, either when the submarine was in the port or even at sea from other supply ships or even supply submarines.Now, we are bringing these food and ammo crates in the form of a nicely detailed resin set, which can be used with other models too.

find out more

6.98 / US$7.39

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Type VIII/IXC Stern Torpedo with loading winch and cart

Yet another of the world’s best resin cast sets tailored for German submarine models. This set is made for the U-Boot Type IX and enables the modeller to open the deck hatch which was used for loading rear torpedos into the submarine using an onboard winch. The master patterns were 3D designed, large parts are cast from resin and tiny parts which could not be produced by the means of resin casting are injection moulded into metal type moulds.

find out more

27.20 / US$28.79

Radiolink 8 channel Transmitter and two Receiver Set

Radiolink  8 channel Transmitter and two Receiver Set

Radiolink 8 channel Transmitter and two Receiver Set

Equipped with FHSS frequency-hopping spread spectrum protocol that offers a superior transmission rate, enhanced interference rejection and a secure full range capability. Perfect for all R/C disciplines from aircraft to quadcopters, through boats, cars and even trucks and locomotives, this is one transmitter that won’t be collecting dust. Take a look at the full feature-set and make special note of its low power consumption, ease of use, and, crucially, the fact that it’s supplied with two R8EF 8-channel receivers.

What's in the Box
1 x T8FB 2.4GHz 8-channel transmitter.
2 x R8EF 8-channel receivers.
1 x Throttle stick spring retainer.
1 x USB (standard) to USB (micro) lead.

Needed to Complete
4 x AA-size batteries for transmitter.

find out more

59.95 / US$63.45

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

1mm Plasticard Sheet 534mm long x 203mm

find out more

5.68 / US$6.01

Universal Motor mounting bracket

Universal Motor mounting bracket

Universal bracket with various mounting hole spacings. Fits all 540,545, & 600 sized motors motors without modification, and will accept 700 sized motors with a bit of filing

find out more

11.74 / US$12.42

Searchlight 6v 20mm dia plastic

Searchlight 6v 20mm dia plastic

2-directional working model, 6V /100mA, pack of 1,
Diameter: 20 mm Height: 34 mm

find out more

8.71 / US$9.22

Working Searchlight plastic 15mm dia 6v

Working Searchlight plastic 15mm dia 6v

Rotating and tilting searchlight with glazed lens, powerful 6V/100mA bulb, Diameter: 15 mm, Height: 24 mm, Cable length: approx.´100 mm

find out more

6.74 / US$7.14

spacer

Inflatable Dinghies, RIBs & Outboard Motors

Online Catalogue | Ship Fittings | CAP Maquettes Fittings |  Inflatable Dinghies, RIBs & Outboard Motors

Inflatable dinghy 105mm long x 50mm wide. Inflatable dinghy 105mm long x 50mm wide.
Ref: CAP/A48105
Inflatable dinghy 105mm long x 50mm wide.. With ouboard motor

Price: 15.55 / US$16.46 (US$ Tax Free Price)


Quantity:  


Inflatable dinghy 90mm long x 48mm wide. With otuboard motor Inflatable dinghy 90mm long x 48mm wide. With otuboard motor
Ref: CAP/A4890
Inflatable dinghy 90mm long x 48mm wide. With otuboard motor

Price: 15.55 / US$16.46 (US$ Tax Free Price)


Quantity:  


Inflatable dinghy with outboard motor 62mm long x 30mm Inflatable dinghy with outboard motor 62mm long x 30mm
Ref: CAP/A3058/100
Inflatable dinghy with outboard motor 62mm long x 30mm wide

Price: 7.76 / US$8.22 (US$ Tax Free Price)


Quantity:  


Inflatable dinghy with outboard motor 70mm long x 30mm Inflatable dinghy with outboard motor 70mm long x 30mm
Ref: CAP/A3065/100
Inflatable dinghy with outboard motor 70mm long x 30mm wide

Price: 7.76 / US$8.22 (US$ Tax Free Price)


Quantity:  


RIB inflatable 230mm long x 90mm RIB inflatable 230mm long x 90mm
Ref: CAP/A31/20
RIB inflatable 230mm long x 90mm

Price: 25.51 / US$27.00 (US$ Tax Free Price)


Quantity:  


RIB Inflatable dinghy 180mm long x 85mm wide RIB Inflatable dinghy 180mm long x 85mm wide
Ref: CAP/A30/15
RIB Inflatable dinghy 180mm long x 85mm wide

Price: 23.62 / US$24.99 (US$ Tax Free Price)


Quantity:  


Inflatable RIB 190mm long x 80mm wide Inflatable RIB 190mm long x 80mm wide
Ref: CAP/A30/20
Inflatable RIB 190mm long x 80mm wide

Price: 25.51 / US$27.00 (US$ Tax Free Price)


Quantity:  


Outboard motor 20mm high x 7mm wide x 8mm deep Outboard motor 20mm high x 7mm wide x 8mm deep
Ref: CAP/AHB/100
Outboard motor 20mm high x 7mm wide x 8mm deep

Price: 2.18 / US$2.31 (US$ Tax Free Price)


Quantity:  


Outboard motor 32mm high x 10mm wide x 14mm deep Outboard motor 32mm high x 10mm wide x 14mm deep
Ref: CAP/AHB/40
Outboard motor 32mm high x 10mm wide x 14mm deep

Price: 6.52 / US$6.90 (US$ Tax Free Price)


Quantity:  


Outboard motor 51mm high x 19mm wide x 32mm deep Outboard motor 51mm high x 19mm wide x 32mm deep
Ref: CAP/A32/15
Outboard motor 51mm high x 19mm wide x 32mm deep

Price: 9.58 / US$10.13 (US$ Tax Free Price)


Quantity:  


Outboard motor 95mm high x 23mm wide x 47mm deep Outboard motor 95mm high x 23mm wide x 47mm deep
Ref: CAP/A320
Outboard motor 95mm high x 23mm wide x 47mm deep

Price: 18.70 / US$19.79 (US$ Tax Free Price)


Quantity:  


Outboard  fuel can 34mm long x 20mm wide x 21mm high Outboard fuel can 34mm long x 20mm wide x 21mm high
Ref: CAP/A31/15
Outboard motor fuel can 34mm long x 20mm wide x 21mm high

Price: 6.77 / US$7.16 (US$ Tax Free Price)


Quantity:  


Boat hook  with alumnium shaft 130mm long Boat hook with alumnium shaft 130mm long
Ref: CAP/R97
Boat hook with alumnium shaft 130mm long

Price: 2.33 / US$2.46 (US$ Tax Free Price)


Quantity:  


Hand Paddles 85mm long x 11mm wide blade Hand Paddles 85mm long x 11mm wide blade
Ref: CAP/R98
Hand Paddles 85mm long x 11mm wide blade

Price: 6.52 / US$6.90 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Fittings | CAP Maquettes Fittings |  Inflatable Dinghies, RIBs & Outboard Motors

spacer
spacer