Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Eyebolt M1 Ball Ø:2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 Ball :2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 BallØ:2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm. Pack of 4.

find out more

1.08 / US$1.15

Ships Horn Ø5mm L:15mm

Ships Horn 5mm L:15mm

Ships Horn Ø:5mm L:15mm: Bell tapers from Ø5 to 1.5mm along 11mm length. Diaphragm chamber Ø3.7mm length 4mm. Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø1mm, Fixing Pin Length 2.5mm. Pack of 2.

find out more

3.60 / US$3.84

Fire Monitor 45mm 1:50 Scale (Pack of 1)

Fire Monitor 45mm 1:50 Scale  (Pack of 1)

Fire Monitor 45mm 1:50 Scale (Pack of 1)
This working model of a water cannon can be
connected to a water pump for realistic action. The kit
consists of injection-moulded parts, a brass tube and silicone
tube. The water cannon can be rotated by means of a servo
and two different nozzles are included which produce
different kinds of water jets. The connector tube has a
diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm.
The water cannon can be painted as required.

find out more

20.10 / US$21.44

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.

John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.

Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.

find out more

9.95 / US$12.74

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

Contains Ten WW2 crew members, of which two are officers. Arms and legs are separate from the body mouldings allowing various poses ro be made.

find out more

17.99 / US$19.19

Mtroniks High PowerMicro Switcher

Mtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

find out more

39.98 / US$42.65

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.27

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$238.87

spacer

Mahogany Runabouts

Online Catalogue | Radio Control Kits |  Mahogany Runabouts

1949 Chris-Craft Racing Runabout Kit 1949 Chris-Craft Racing Runabout Kit
Ref: P01704
1949 Chris-Craft Racing Runabout Kit

We think the 1949 Chris-Craft 19 ft. Racing Runabout is our sleekest looking Chris-Craft to date. Our 1/8th scale version of this popular racer is 28 inches long with a 9 inch beam. The wood framed hull is covered with expanded pvc and then planked with mahogany veneer. Like our other Chris-Crafts this kit features the finest materials including chrome plated dack fittings complete drive line hardware flag and burgee. Each kit contains everything needed to build a beautiful static display model for the office or den. Or make her RC with a two channel radio Dumas #2025 motor NiCad batteryand speed control. You will want to make the powerful Racing Runabout the next addition to you fleet.

Price: 157.94 / US$168.47 (US$ Tax Free Price)


Quantity:  


Chris-Craft 16ft Hydroplane 1941 Chris-Craft 16ft Hydroplane 1941
Ref: P01708
Chris-Craft 16ft Hydroplane 1941

When the Chris-Craft Racing Hydroplane was first delivered, it was accompanied with a warning: "FOR RACING ONLY". Chris-Craft knew that they had a thoroughbred on their hands. Equipped with a high-performance 121 horsepower KB engine shoehorned in, the three in-line carburetors protruded above the deck. The streamlined red fairing, designed to shield the carburetors, came to symbolize one of the fastest and most desirable Chris-Craft boats of the pre-war years. This kit is very similar in construction to our 19' Racing Runabout, kit #1249, in that it utilizes the popular expanded PVC and mahogany double planking method. The new 16' hydroplane kit includes all the items you have come to expect from a Dumas kit. Step-by-Step instructions, flag, decal, chrome plated fittings and laser cut parts which we started using in our #1249 Racing Runabout kit. Radio Control or Static 1941 Chris-Craft 16' Hydroplane Model Boat Kit

Price: 170.95 / US$182.35 (US$ Tax Free Price)


Quantity:  


Dumas Chris-Craft 24 ft. Runabout Laser Classic Kit Dumas Chris-Craft 24 ft. Runabout Laser Classic Kit
Ref: P01722
Dumas Chris-Craft 24 ft. Runabout Laser Classic Kit

?Length Overall - 12.0ins (305mm)
?Beam - 3.50ins (89mm)
?All parts needed to build kit including plan sheet are included
?All wood construction
?Laser cut wood parts
?Easy to build and she is fast and fun
?Step-by-step instructions, a complete set of cast metal deck fittings

Price: 170.95 / US$182.35 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Radio Control Kits |  Mahogany Runabouts

spacer
spacer