Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Eyebolt M1 Ball Ø:2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 Ball :2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 BallØ:2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm. Pack of 4.

find out more

1.08 / US$1.15

Ships Horn Ø5mm L:15mm

Ships Horn 5mm L:15mm

Ships Horn Ø:5mm L:15mm: Bell tapers from Ø5 to 1.5mm along 11mm length. Diaphragm chamber Ø3.7mm length 4mm. Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø1mm, Fixing Pin Length 2.5mm. Pack of 2.

find out more

3.60 / US$3.84

Fire Monitor 45mm 1:50 Scale (Pack of 1)

Fire Monitor 45mm 1:50 Scale  (Pack of 1)

Fire Monitor 45mm 1:50 Scale (Pack of 1)
This working model of a water cannon can be
connected to a water pump for realistic action. The kit
consists of injection-moulded parts, a brass tube and silicone
tube. The water cannon can be rotated by means of a servo
and two different nozzles are included which produce
different kinds of water jets. The connector tube has a
diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm.
The water cannon can be painted as required.

find out more

20.10 / US$21.44

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.

John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.

Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.

find out more

9.95 / US$12.74

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

Contains Ten WW2 crew members, of which two are officers. Arms and legs are separate from the body mouldings allowing various poses ro be made.

find out more

17.99 / US$19.19

Mtroniks High PowerMicro Switcher

Mtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

find out more

39.98 / US$42.65

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.27

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$238.87

spacer

Master Gun Barrels

Online Catalogue | Ship Fittings |  Master Gun Barrels

HMS Belfast armament Set 1:350 HMS Belfast armament Set 1:350
Ref: SM35079
HMS Belfast armament - 6in (12pcs), 4in (12pcs) barrels - set includes resin correction for 6in gun mounting

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 14.30 / US$15.26 (US$ Tax Free Price)


Quantity:  


HMS Dreadnought armament Set 1:350 HMS Dreadnought armament Set 1:350
Ref: SM35067
HMS Dreadnought armament set - 12in (10pcs), 12pdr (26pcs) barrels

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 11.50 / US$12.26 (US$ Tax Free Price)


Quantity:  


HMS Warspite armament Set 1:350 HMS Warspite armament Set 1:350
Ref: SM35068
HMS Warspite armament - 15in (8pcs), 6in (8pcs), 4in (8pcs) barrels (designed to be used with Academy kits)

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 11.86 / US$12.65 (US$ Tax Free Price)


Quantity:  


HMS Repulse armament set 1:350 HMS Repulse armament set 1:350
Ref: SM35036
HMS Repulse armament - 15in (6pcs), 4in QF (6pcs), 4in BL (9pcs) barrels. (designed to be used with Trumpeter kits) Fit to Trumpeter model.

The set includes turned aluminum and brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 12.20 / US$13.02 (US$ Tax Free Price)


Quantity:  


Prinz Eugen armament set 1:350 Prinz Eugen armament set 1:350
Ref: SM35043
Prinz Eugen armament - 203mm (8pcs), 105mm (12pcs) barrels (designed to be used with Trumpeter kits)

The set includes turned aluminum and brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 8.99 / US$9.59 (US$ Tax Free Price)


Quantity:  


Graf Spee armament set 1:350 Graf Spee armament set 1:350
Ref: SM35044
Admiral Graf Spee armament - 280mm (6pcs), 150mm (8pcs), 105mm (6pcs) barrels (designed to be used with Academy and Trumpeter kits)

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 10.99 / US$11.72 (US$ Tax Free Price)


Quantity:  


Scharnhorst armament Set 1:350 Scharnhorst armament Set 1:350
Ref: SM35057
Scharnhorst armament without blastbags - 280mm (9pcs), 150mm (12pcs), 105mm (14pcs) barrels (designed to be used with Dragon kits)

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 11.86 / US$12.65 (US$ Tax Free Price)


Quantity:  


British 14in (356mm) Mark VII barrels (10 pcs).1:350 British 14in (356mm) Mark VII barrels (10 pcs).1:350
Ref: SM35012
British 14in (356mm) Mark VII barrels (10 pcs). Used in King George V, Prince of Wales, Duke of York, Anson and Howe (King George V battleship class). The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 11.50 / US$12.26 (US$ Tax Free Price)


Quantity:  


British 5,25in (133mm) QF Mark I barrels British 5,25in (133mm) QF Mark I barrels
Ref: SM35013
British 5,25in (133mm) QF Mark I barrels (16 pcs). Used in King George V battleship class, Dido classes & Vanguard battleship. The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 8.70 / US$9.28 (US$ Tax Free Price)


Quantity:  


Bofors 40 mm/56 (1.5in) barrels (20 pcs) Bofors 40 mm/56 (1.5in) barrels (20 pcs)
Ref: SM35014
Bofors 40 mm/56 (1.5in) barrels (20 pcs) It was AA heavy MG used in almost every major US, UK and other warship of WW II. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 6.10 / US$6.50 (US$ Tax Free Price)


Quantity:  


British 2-pdr - 40mm/39 Barrels (20 pcs) British 2-pdr - 40mm/39 Barrels (20 pcs)
Ref: SM35015
British 2-pdr - 40mm/39 (1.575in) Mark VIII (POM-POM) barrels (20 pcs). It was AA heavy MG used in almost all major UK (and other) warship of WWII. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 3.98 / US$4.25 (US$ Tax Free Price)


Quantity:  


British 4in/45 (10.2 cm) QF HA Marks XVI British 4in/45 (10.2 cm) QF HA Marks XVI
Ref: SM35018
British 4in/45 (10.2 cm) QF HA Marks XVI barrels (14 pcs). Used in almost every UK (and other) warship of WWII. It was used in Hood, Rodney, HMS Warspite and other British battleships, County class heavy cruisers, other cruiser and destroyer classes (e.g. Polish destroyer Blyskawica). Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.99 / US$5.32 (US$ Tax Free Price)


Quantity:  


British 15in/42 (38.1cm) Mark I barrels British 15in/42 (38.1cm) Mark I barrels
Ref: SM35037
British 15in/42 (38.1cm) Mark I - without blastbags (8 psc). Used on: British Capital Ships: - Queen Elizabeth (Barham, Malaya, Valiant, Warspite), - Revenge (Royal Sovereign,Royal Oak,Resolution,Ramillies), - Courageous and Glorious before conversion, - Repulse (Renown), - Hood, - Vanguard, British Monitors: Marshal Soult, Erebus and Roberts classes

The set includes turned aluminum barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 9.60 / US$10.24 (US$ Tax Free Price)


Quantity:  


Vickers 0.50in/62 (12.7 mm) Mark III M.G Vickers 0.50in/62 (12.7 mm) Mark III M.G
Ref: SM35038
Vickers 0.50in/62 (12.7 mm) Mark III machine gun barrels (20pcs). Standard British AA weapon prior to the Oerlikon. Used on almost all British warships during World War II, many in quad mounts.

It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.99 / US$5.32 (US$ Tax Free Price)


Quantity:  


40mm Bofors air cooled gun barrels (Pack of 20) 40mm Bofors air cooled gun barrels (Pack of 20)
Ref: SM35081
Bofors 40 mm - air-cooled gun barrels (20pcs) - used on many ships (HMS Roberts and many more)

The set includes turned aluminum barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.20 / US$4.48 (US$ Tax Free Price)


Quantity:  


German 37mm/83 SK C/30 barrels (Pack of 20) German 37mm/83 SK C/30 barrels (Pack of 20)
Ref: SM35045
German 37mm/83 SK C/30 barrels (20pcs). Used in almost all German warships between 1930 and 1943

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.20 / US$4.48 (US$ Tax Free Price)


Quantity:  


German 37mm/69 M42 barrels (20pcs) German 37mm/69 M42 barrels (20pcs)
Ref: SM35046
German 37mm/69 M42 barrels (20pcs). Used in many German warships after 1944

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.20 / US$4.48 (US$ Tax Free Price)


Quantity:  


German 20mm/65 C/30 barrels Early (20pcs) German 20mm/65 C/30 barrels Early (20pcs)
Ref: SM35047
German 20mm/65 C/30 barrels (early type) (20pcs) - almost all German warships. Used in almost all German warships

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.20 / US$4.48 (US$ Tax Free Price)


Quantity:  


German 20mm/65 C/38 barrels  Late (20pcs) German 20mm/65 C/38 barrels Late (20pcs)
Ref: SM35048
German 20mm/65 C/38 barrels (late type) (20pcs) Used in almost all German warships (antiaircraft weapon).

The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 4.20 / US$4.48 (US$ Tax Free Price)


Quantity:  


German 38cm (15in) SKC/34 barrels (8psc). 1:350 scale German 38cm (15in) SKC/34 barrels (8psc). 1:350 scale
Ref: SM35001
German 38cm (15in) SKC/34 barrels (8psc). 1:350 scale Used in Bismarck/Bismark and Tirpitz battleships. The set includes turned aluminium barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives.

Price: 9.20 / US$9.82 (US$ Tax Free Price)


Quantity:  


German 15cm (5.9in) SKC/28 barrels (12pcs) 1:350 scale German 15cm (5.9in) SKC/28 barrels (12pcs) 1:350 scale
Ref: SM35002
German 15cm (5.9in) SKC/28 barrels (12pcs). Used in Bismarck/Bismark, Tirpitz, Scharnhorst and Gneisenau battleships. The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining part and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 6.30 / US$6.72 (US$ Tax Free Price)


German 10.5cm (4.1in) SKC/33 barrels Early (16) German 10.5cm (4.1in) SKC/33 barrels Early (16)
Ref: SM35003
German 10.5cm (4.1in) SKC/33 barrels - early type (16pcs). This gun was standard AA gun for larger German warships (Deutschland, Scharnhorst, Bismarck/Bismark, 'H', Admiral Hipper and Prinz Eugen classes). The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 8.20 / US$8.74 (US$ Tax Free Price)


Quantity:  


German 10.5cm (4.1in) SKC/33 barrels Late (16) German 10.5cm (4.1in) SKC/33 barrels Late (16)
Ref: SM35004
German 10.5cm (4.1in) SKC/33 barrels - late type (16pcs). This gun was standard AA gun for larger German warships (Deutschland, Scharnhorst, Bismarck/Bismark, 'H', Admiral Hipper and Prinz Eugen classes). The set includes turned brass barrels. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives. 1:350 scale

Price: 8.47 / US$9.04 (US$ Tax Free Price)


Quantity:  


German 38cm Gunbarrels (8 pcs).1:200 German 38cm Gunbarrels (8 pcs).1:200
Ref: SM20006
German 38cm Gunbarrels (8 pcs).1:200

Suitable for the Trumpeter Bismark kit or Tirpiz at the same scale. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives.

Price: 14.60 / US$15.58 (US$ Tax Free Price)


Quantity:  


German 15cm and 10.5cm Gunbarrels set (28) 1:200 German 15cm and 10.5cm Gunbarrels set (28) 1:200
Ref: SM20007
German battleship Bismarck - secondary and heavy AA armament barrels - 15 cm (12 pcs), 10,5cm (16 pcs)

Suitable for the Trumpeter Bismark kit or Tirpiz at the same scale. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives.

Price: 8.99 / US$9.59 (US$ Tax Free Price)


Quantity:  


German 37mm, 20mm ( two types) Gunbarrels  (36) 1:200 German 37mm, 20mm ( two types) Gunbarrels (36) 1:200
Ref: SM20008
German battleship Bismarck - anti-aircraft armament barrels - 37 mm SKC/30 (16 pcs), 20mm C/30 (12 pcs), 20 mm C/38 (8 pcs) 1:200

Suitable for the Trumpeter Bismark kit or Tirpiz at the same scale. It is very simple to use in Your model, and makes it extremely realistic. Simply cut off the original plastic barrel and drill a hole in the remaining breech mechanism and insert the metal barrel using Cyanoacrylate adhesives.

Price: 8.99 / US$9.59 (US$ Tax Free Price)


Quantity:  


Yardarm Set No1 1:350 scale, 5 sizes, 2 of each Yardarm Set No1 1:350 scale, 5 sizes, 2 of each
Ref: SM35087
Yardarm Set No1 1:350 scale. Made from Brass and tapering from the centre to the outboard end. 10mm, 15mm, 25mm, 30mm, and 35mm long. 2 of each size in the pack

Price: 6.20 / US$6.62 (US$ Tax Free Price)


Quantity:  


Yardarm Set No1 1:350 scale, 5 sizes, 2 of each Yardarm Set No1 1:350 scale, 5 sizes, 2 of each
Ref: SM35088
Yardarm Set No1 1:350 scale. Made from Brass and tapering from the centre to the outboard end. 40mm, 45mm, 50mm, 55mm, 60mm, 65mm long. 1 of each size in the pack

Price: 6.20 / US$6.62 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Fittings |  Master Gun Barrels

spacer
spacer