Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

6in long 2mm plain / M2mm thread Propshaft

6in long  2mm plain / M2mm thread Propshaft

2mm plain / M2 thread Propshaft. Shaft is 1 inch longer than the tube. Stainless Steel shaft with 6in long x 6mm dia Brass tube, with brass bearing

find out more

6.50 / US$6.94

6.3 x 3.7mm Brass Stud-Link Chain 1 mtr

6.3 x 3.7mm Brass Stud-Link Chain 1 mtr

6.3 x 3.7mm Brass Stud-Link Chain 1 mtr

find out more

13.68 / US$14.59

Ship's boat crane 40mm high with 90mm reach

Ship's boat crane 40mm high with 90mm reach

This scale-like model crane consists of two injection moulded components. It is very easy to install, it rotates horizontally and is fitted with a crane hook, which can be raised and lowered.40mm high with 90mm reach

find out more

16.81 / US$17.93

Inflatable boat with outboard motor 1:25 140mm

Inflatable boat with outboard motor 1:25 140mm

Inflatable boat with outboard motor 1:25 140mm

find out more

23.57 / US$25.14

Flat backed Masthead lamp set 10mm dia x 10mm 6v (4)

Flat backed Masthead lamp set 10mm dia x 10mm 6v  (4)

Pack of 4 clear flat backed masthead lamps for model yachts. ø 9.5 mm, H: 9.5 mm. The set contains 4 miniature bulbs ø 3 mm / 50 mA, (1 red, 1 green, 2 clear). Cablelength 300 mm.

find out more

13.09 / US$13.96

Two spoke dished steering wheel 35mm dia

Two spoke dished steering wheel 35mm dia

Two spoke dished steering wheel 35mm dia

find out more

4.74 / US$5.06

Three spoke dished valve wheel 5mm dia (10)

Three spoke dished valve wheel 5mm dia (10)

Three spoke dished valve wheel 5mm dia (10)

find out more

5.99 / US$6.39

Cannon Barrel brass 55mm (2)

Cannon Barrel brass 55mm (2)

Cannon Barrel brass 55mm (2)

These are one-off barrels made by Caldercraft and will not be put into full time production. Therefore do not order more than the quantity as showing in stock.

find out more

4.90 / US$5.22

Fixed Kort nozzle with rudder with 60mm dia prop

Fixed Kort nozzle with rudder with 60mm dia prop

Fixed Kort nozzle with rudder and special 60 mm diameter propeller. For model boats requiring maximum possible thrust.

find out more

22.02 / US$23.49

Propshaft waterproof grease 30ml

Propshaft waterproof grease 30ml

Propshaft waterproof grease 30ml . Comes supplied in a handy syringe for easy application.

find out more

7.15 / US$7.63

spacer

Waterline Markings

Online Catalogue | Building Materials | BECC Transfers |  Waterline Markings

00



Vinyl Lettering is supplied in sheet form with the characters and symbols computer cut from a flexible vinyl film with a waxed backing sheet and the surplus film in place to prevent the letters becoming loose. Characters are removed from the backing sheet and applied direct to the model. The permanent adhesive ensures the letters remain in place without any additional treatment although they will withstand overcoating with all standard varnishes and sealers.

The sets are supplied with full colour instructions to help in positioning. The letters can be applied to almost any substrate as long as it is clean and free from dust. Being only 70 microns thick, they conform easily to uneven surfaces and can be moulded further with the application of mild heat, from a hair dryer for example.

Waterline Markings 

Roman Numeral waterline markings , Plimsol lines, Bow thruster warning symbol and Bulbous Bow symbols. Approximately 50 of each numeral character and a selection of sizes for the others. Each sheet contains each of the following numeral sizes, 2, 3, 4 and 6mm.

Prealigned Waterline Markings

Similar to the above, but each sheet contains scale spaced, metric , Euro or Imperial depth markings. Scales include 1:200 1:150, 1:128, 1:100, 1:96, 1:75, 1:72, 1:60, 1:50, 1:32, 1:24 and 1:24 scales, and are available in either Black or White.




Online Catalogue | Building Materials | BECC Transfers |  Waterline Markings

spacer
spacer