Online Catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

New Products

Eyebolt M1 Ball Ø:2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 Ball :2mm Thread Length :10mm (Pack of 4)

Eyebolt M1 BallØ:2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm. Pack of 4.

find out more

1.08 / US$1.15

Ships Horn Ø5mm L:15mm

Ships Horn 5mm L:15mm

Ships Horn Ø:5mm L:15mm: Bell tapers from Ø5 to 1.5mm along 11mm length. Diaphragm chamber Ø3.7mm length 4mm. Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø1mm, Fixing Pin Length 2.5mm. Pack of 2.

find out more

3.60 / US$3.84

Fire Monitor 45mm 1:50 Scale (Pack of 1)

Fire Monitor 45mm 1:50 Scale  (Pack of 1)

Fire Monitor 45mm 1:50 Scale (Pack of 1)
This working model of a water cannon can be
connected to a water pump for realistic action. The kit
consists of injection-moulded parts, a brass tube and silicone
tube. The water cannon can be rotated by means of a servo
and two different nozzles are included which produce
different kinds of water jets. The connector tube has a
diameter of Ø 4 mm,the jet nozzle has a diameter of Ø 2mm.
The water cannon can be painted as required.

find out more

20.10 / US$21.44

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell

Radio Control In Model Boats by John Cundell Radio controlled model boating began to establish itself as a popular hobby in the 1950's and there was great excitement, even incredulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more surprised if a model does not have a radio! In the interim, the equipment used has made great strides, to the point where the customer simply has to plug in the batteries, switch on and it all works: no technical knowledge whatsoever is needed. However, guidance is needed to install the radio in the model and learn how to use it to its best advantage.

John Cundell is an author of many years’ experience at club, national and international level. In his capacity as editor of Model Boats magazine he is very aware of the sort of questions likely to be asked by the less experienced and, perhaps more importantly, knows the problem areas likely to be encountered by the unsuspecting newcomer.

Radio Control in Model Boats, first published in 1986, is a totally practical book and this revised edition brings you right up-to-date. If you follow carefully the simple procedures which arc clearly explained, you will undoubtedly be on the road to success in this fascinating hobby.

find out more

9.95 / US$12.74

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

PT Boat Crew Set 1:35 scale

Contains Ten WW2 crew members, of which two are officers. Arms and legs are separate from the body mouldings allowing various poses ro be made.

find out more

17.99 / US$19.19

Mtroniks High PowerMicro Switcher

Mtroniks High PowerMicro Switcher

The HP Switcher allows two accessories to be controlled in a momentary or latching action from one radio channel. This allows you to control either two auxilliaries from a sound module or even two stand alone items like LED lighting from one radio channel on your transmitter. 15amp capacity

find out more

39.98 / US$42.65

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

Lightcraft Slimline Illuminated Magnifier

A round 16w daylight lamp with glass lens, featuring longer arms with sturdy joints for extra flexibility & positioning. Ideal for close-up intricate work.

Key Features
16 watt energy saving fluorescent tube (LC8076/T)
Cable length 1.5m
Electronic ballast - more energy efficient
Includes table clamp with cone holder foir extra stability
Long Reach Slim Line Magnifier Lamp
Quality 125mm (5") lens, 3 dioptre (1.75x mag.)
Removable sun protector cap
Shadow free light with low heat emission

find out more

64.94 / US$69.27

Fife. Scottish Drifter 1:32 scale 700mm

Fife. Scottish Drifter 1:32 scale 700mm

The Fifie is a type of fishing vessel developed on the east coast of Scotland. The kit has been designed specifically for any type of model maker, and as such it is a perfect kit for those who want and expect a little more. All fittings, masts and rig have been researched using contemporary sources and the most up to date reference material available to make the kit as accurate and as detailed as possible.

find out more

223.94 / US$238.87

spacer

Fishing Boats

Online Catalogue | Ship Plans | Model Boats Magazine Plans |  Fishing Boats

All plans on this page are printed to order. Details of how long this take will be Found here


Shirley Ann Shirley Ann
Ref: MM1422
Shirley Ann: A modern small inshore stern trawler at 1:16 scale 685mm length 190 beam and 12lbs. displacement with Kort nozzle steering. Lots of substantial detail.

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


MFV Admiralty Trawler MFV Admiralty Trawler
Ref: MM2110
MFV Admiralty Trawler:

This is a plan for a World War Two Admiralty 61.5 foot Motor Fishing Vessel, drawn to a scale of 1:25 and designed by James Pottinger for either a static or radio controlled model.

A fully illustrated supporting article was included in the 2015 Model Boats December 2015 issue. This project is recommended for those with some experience of building a wooden hulled model using the detailed and comprehensive plans. No building guidance is provided, although all the frames and hull lines are included. Model length at 1:25 scale is 29.5 inches (745mm).

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Peadar Elaine Peadar Elaine
Ref: MM1483
Peadar Elaine: A specialised Crab Catcher at 1:25 scale, overall length 29 ins by 10 ins beam. Two sheet plan showing hull. Wheelhouse and details. For single screw power.

Price: 13.00 / US$13.86 (US$ Tax Free Price)


Quantity:  


45' Admiralty Pl MFV 45' Admiralty Pl MFV
Ref: MAGM2019
45' Admiralty Pl MFV: WW2 Motor Fishing Boat 1: scale 762mm

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Kingston Peridot Plan Kingston Peridot Plan
Ref: MM1482
Kingston Peridot Plan 1:48 scale 1257mm

Side fishing steam trawler, scale 1:48, overall length 49.5in by 7.5in beam. Single screw, ideal for steam power. Built in 1948 by Cook Welton & Gemmell he was operated by the Kingston Steam Trawling Co Ltd Hull until 1966, when she was sold to Hellyer Brothers Ltd Hull. The Vessel sank in gale force winds off Iceland in 1968 with the loss of all hands.

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Ardent Ardent
Ref: MM1507
Ardent: Two sheet plan for a 1980's Dual Purpose Fishing Boat. Scale is 1:3 giving a model length of 29 ins by 10 ins beam. Plan includes side and plan elevations, keel, frames and detail views. No model construction details.

Price: 13.00 / US$13.86 (US$ Tax Free Price)


Quantity:  


Portia Portia
Ref: MM1118
Portia: Profile, sheer, and lines drawing, for a 53¾in. model of a trawler which set new standards when launched in 1956 and introduced several features which are now widely used on fishing craft. Scale 1:48, no model construction details shown. Two sheets

Price: 17.50 / US$18.66 (US$ Tax Free Price)


Quantity:  


Boston Sea Boston Sea
Ref: MM1323
Boston Sea: A modern stern trawler, scale 1:50, length 26¼ins., by beam 7¼ins., a smaller sister to the Boston Blenheim. Displacement is approximately l4lbs, Plan includes side and deck views, bridge front, stern and some deck fittings details. No model construction is included.

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Glenrose 1 Glenrose 1
Ref: MM1469
Glenrose 1: Four sheets of drawings for a modern stern trawler to a scale of 1:40, giving a length of 38in

Price: 22.50 / US$24.00 (US$ Tax Free Price)


Quantity:  


Formidable Formidable
Ref: MM1441
Formidable: Steam drifter, wood construction, of 1917, at 1:33 scale, giving a 34in. hull, 7in. beam and l3lbs. displacement. Two sheets with full-size details sketched.

Price: 17.50 / US$18.66 (US$ Tax Free Price)


Quantity:  


Velinheli Velinheli
Ref: MM1475
Velinheli: Metal hulled steam coaster 48in. long by 9in. beam for steam or electric power. Plan includes frames, buttocks, sheerlines, profile, half deck plan, sections and most details

Price: 22.50 / US$24.00 (US$ Tax Free Price)


Quantity:  


Boston Arrow Boston Arrow
Ref: MM666
Boston Arrow: Modern trawler model 36¼in. length beam 7¼in. Bread-and-butter construction, accurate detail. Outlines and body plan only, for experienced modellers

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Eileen Eileen
Ref: MM737
Eileen: A fine 28in, model of a motor fishing keel-boat vessel. Not originally built as a working model, Eileen can, however, be powered by medium sized electric motors. Scale 1:24. Beam 8in

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


My Susanne My Susanne
Ref: MM925
My Susanne: A modern transom sterned inshore fishing trawler with a planked hull. Length 22½in., beam 8in. Can be built throughout in balsa

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Strath Class Strath Class
Ref: MM1211
Strath Class: An example of a class of armed trawler of World War I vintage, many of which were used again in W.W.II. Length 30½in., beam 5½in., about 8lb. displacement. Lines and visible detail, no construction shown, Scale 1:48

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Ocean Reward Ocean Reward
Ref: MM1209
Ocean Reward: A steel drifter, built in 1914, very typical of the most common type of steam powered, steel-built craft. At 1:48 scale, length is 22¾in., beam 5ins., and displacement about 3 7lbs. Lines and visible details only.

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Frederick Spashett Frederick Spashett
Ref: MM1238
Frederick Spashett: An attractive drifter/trawler, drawn to a scale of 1:48, length 21¼ins., beam 5¾ins. Profile and deck plan, body plan, superstructure and rigging details

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Boston Lincoln Boston Lincoln
Ref: MM1267
Boston Lincoln: Outlines and waterlines of a freezer factory trawler, sister ship of Boston Blenheim. Hull lines, sections and details are drawn at 1:48 scale, model length 59ins., with plan and elevation at ½in. to lft. The plan does not include model building information

Price: 17.50 / US$18.66 (US$ Tax Free Price)


Quantity:  


Boston Blenheim Boston Blenheim
Ref: MM1284
Boston Blenheim: Detailed plans of a modern stern trawler, model length 37in. by 8in. beam, at a scale of 1:48. Planked hull on frames, for electric power

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Taku Maru Taku Maru
Ref: MM1295
Taku Maru: A 28in. long by 8in. beam shrimp trawler from the West Indies at 1:32. Plan includes elevation and deck views, hull lines, no model structure

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


St Finbarr St Finbarr
Ref: MM1342
St Finbarr: An attractively different fishing boat of the 1960's drawn at 1:48 scale, overall length 53in., by 9¼in. beam. Sheet one shows elevation and plan, sheet two bridge details, platform and gantry, sheet three bodylines

Price: 22.50 / US$24.00 (US$ Tax Free Price)


Quantity:  


St Elmo St Elmo
Ref: MM1207
St Elmo: Built in 1914, this is the sort of trawler which typifies the steam era of such vessels. At 1:48 scale, length is 36½in. and beam 5¾in. Lines and visible detail only, no model construction included

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Admiralty MFV Admiralty MFV
Ref: MM1216
Admiralty M.F.V attractive 75ft. MFV as designed for naval use with an eye to later conversion to civilian fishing. Drawing indicates structure of full-size vessel but does not show model construction. Hull length 28½in., beam 7 3/8in. displacement 9lbs

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


MFV Admiralty Trawler MFV Admiralty Trawler
Ref: MM2083
MFV Admiralty Trawler:

This is a two sheet plan designed by James Pottinger for a classic Admiralty support vessel, that subsequently saw service in the UK fishing fleet. Model length overall is 27.5 inches (71cm) long and plan scale is 1:40.

The plans include the hull lines and deck and superstructure detail and relevant data, together with some model construction information. The model is recommended for those with experience of building from plans. The plan and accompanying article with photographs of the model was first featured in August 2013 Model Boats magazine.

Price: 12.50 / US$13.34 (US$ Tax Free Price)


Quantity:  


Launch Out Launch Out
Ref: MM1134
Launch Out: Smart 27½in., side and pair trawler, typical of NE coast. Planked hull, detailed drawings with construction notes on two sheets. Beam just over 8in

Price: 17.50 / US$18.66 (US$ Tax Free Price)


Quantity:  


Online Catalogue | Ship Plans | Model Boats Magazine Plans |  Fishing Boats

spacer
spacer